OakvilleSite Alteration & EngineeringSite Alteration

Development Engineering Procedures and Guidelines

Published by Town of Oakville

The municipality lists what to submit. CodeEase shows what the building code asks of it. See CodeEase →

This is the Town of Oakville’s document, as published on its website on 22 October 2026. The municipality may have changed it since: check the current version at the source. Legal notice

Type: Guide
Published by: Town of Oakville
For: designer
Building types: All building types
Pages: 129
Agencies: Ministry of Transportation · Credit Valley Conservation · Conservation Halton · Regional Municipality of Halton · Regional Municipality of Peel · Ministry of the Environment, Conservation and Parks · Ministry of Natural Resources and Forestry

Overview

The Town of Oakville's 129-page Development Engineering Procedures and Guidelines manual, prepared for the Development Services Section of the Transportation and Engineering Department, final version 2.0, September 2023. It sets out policies and jurisdictions, subdivision design criteria for stormwater, lot grading and roads, subdivision submission requirements, construction methods and materials, subdivision administration and assumption, and site plan development. It is the engineering reference behind the Town's grading, site alteration and servicing guides and permits.

What it covers

Overview of Manual
Policies and Jurisdictions
Subdivision Design Criteria
Subdivision Submission Requirements
Construction Methods and Materials (Municipal Sewer and Road Works)
Subdivision Administration
Site Plan Development
References
Lot Grading and Drainage Criteria
Municipal Roads Criteria
Tree Protection and Preservation Policy/Permit

Check this against the municipality before you rely on it.

DocHub collects what a municipality published; it cannot tell you what is in force today. A newer version may exist, may be titled differently, or may not be posted publicly at all.