MiltonBuilding PermitsCommercial, Industrial & Institutional

Energy Efficiency Compliance Checklist Part 9 Non Residential Buildings

Published by Town of Milton

The municipality lists what to submit. CodeEase shows what the building code asks of it. See CodeEase →

This is the Town of Milton’s document, as published on its website on 23 October 2026. The municipality may have changed it since: check the current version at the source. Legal notice

Type: Checklist
Published by: Town of Milton
Date: Version 1 May, 2017
Also called: SB 10 Part 9 Non Residential
For: designer
Signed by: Designer
Building types: All building types
Pages: 6
Agencies: Ministry of Municipal Affairs and Housing
Instruments: Ontario Building Code Supplementary Standard SB-10 Division 4

Overview

A six-page energy efficiency compliance checklist for Part 9 non-residential buildings, based on Division 4 of Ontario Building Code Supplementary Standard SB-10 and made available by the Ministry of Municipal Affairs and Housing, version 1, May 2017. It opens with designer information and a scope test, then sets out the building envelope thermal table by degree-day zone, air infiltration, HVAC, ducts, service water heating, lighting, lighting controls and electric motors. The Town of Milton posts it as its Part 9 SB-10 form.

What it covers

Energy Efficiency Design
THERMAL PERFORMANCE OF THE BUILDING ENVELOPE
AIR INFILTRATION
HEATING, VENTILATING AND AIR CONDITIONING
DUCTS, PLENUMS AND PIPING
SERVICE WATER HEATING
INTERIOR LIGHTING
INTERIOR LIGHTING CONTROLS
EXTERIOR LIGHTING
EXTERIOR LIGHTING CONTROLS
ELECTRIC MOTORS

Check this against the municipality before you rely on it.

DocHub collects what a municipality published; it cannot tell you what is in force today. A newer version may exist, may be titled differently, or may not be posted publicly at all.