Markham · Certificateswritten

Fire Pump Test Certificate

Published by City of Markham under Building Permit Process

Open at markham.ca ↗
Form ref
Ontario Building Code, Section 3.2.6
Applies to
contractor
Work types
any
Document date
Aug 09

The City of Markham's certificate testing an installed fire pump system before the Building Standards Department's witness test. Its checklist covers the pump's capacity to run at full load for two hours or thirty minutes depending on the building's scope under Section 3.2.6 of the Ontario Building Code, suction and discharge gauge installation, dedicated transfer switches, feeder fire-resistance rating, conductor sizing at 125 percent of full load, and fire alarm annunciation of the pump. The installer and building owner or representative sign, certifying testing to the CSA and/or ULC listing and NFPA 20 where applicable.

What it covers

  • Fire pump data
Check this against the municipality before you rely on it. DocHub collects what a municipality published; it cannot tell you what is in force today. A newer version may exist, may be titled differently, or may not be posted publicly at all.
Publisher
City of Markham
Category
Certificates
Published under
Building Permit Process — the municipality's own heading
Submit to
City of Markham Building Standards Department
Instruments
Ontario Building Code, Section 3.2.6 · NFPA 20
Signatories
installer · building owner or owner's representative
Required for
Witness testing of an installed fire pump system
Building types
any
Tags
certificatefire-pumplife-safety-systemstesting
File
the document at Markham
Found on
markham.ca/economic-development-business/building-permits/…

The same file, also linked at

  1. Building Permit Formsopen
Fire Pump Test CertificateOpen at markham.ca

Pick a document. It opens here as the real file — you can select its text, search inside it, follow its own links, and every page is present.